The Mamba Micro X2 allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Quick Tip: You can use the Quick Connect Duo (sold separately) to allow you to access both wires into a single Castle Link connection. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. You will be able to record real-time data such as motor RPM, ESC and motor temperature, throttle input, and more. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo)Įnabled by default, the Mamba Micro X2 captures and records performance data from your vehicle. Up to 2S LiPo and weighing in at up to 1.5lbs. We recommend a high current connector rated for at least 40 amps. You must add the connector of your choice to the battery leads. Technical Specs 0808-8200Kv Brushless Sensorless Motorģ.5mm gold connectors (female connectors included) While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. Always rinse the ESC with clean water after exposure to corrosives or dirt. They can corrode when exposed to corrosive materials, such as salt water. *Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. We recommend a high current connector rated for at least 40 amps.ġ:18 scale RC hobby vehicles weighing up to 1.5lbs with included 0808-8200KV motor.Īdditional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare.We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Recommended battery capacity for 1:18 scale vehicles is 1500mAh.Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty.84")īattery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. Waterproof* design allows for use in nearly any environmentĤ1.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.ĢS-4S LiPo (16.8V Max) (2s LiPo max with included 0808-8200KV motor).Audible Alerts that will notify you of possible issues with calibrations and error conditions.Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.Telemetry Ready (C ompatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters ).Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately).Convenient transmitter programming for six common adjustable settings.Input Voltage range 2S-3S (with included 0808-4100Kv motor).You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |